NEWS

新闻资讯

  • 铝方通的选择技巧
  • 本站编辑:杭州欧宏建材有限公司发布日期:2019-06-02 14:47 浏览次数:
靠前、材质。
市场上的铝材主要有以下几种:按铝材的产地分为普通铝材、广铝、西南铝;按铝材的国际标号又分为1100、3003、5005等标号;按铝材的合金强度分为H24、H18等;按铝材的韧性分为普通铝材、铝镁合金、铝锰合金。市场上销售的吊顶材料中大部分都采用普通的铝材,其特点是强度低,平整度一般,韧性强,不变形。没有好的基材,会大大影响铝方通的使用寿命。
第二、表面处理。
铝方通的表面处理主要有以下几种:喷涂、烤漆、滚涂、覆膜。其中喷涂、烤漆使用寿命短,容易出现色差,滚涂使用寿命居中,覆膜板又可分为普通膜与进口膜,进口膜的使用寿命基本上能达到20年不变色。
规定的厚度大小的厚度大小、工艺。
所谓工艺就是板材有表层的粘合,这是消费者比较忽略的一块。如果工艺不好对于产品的使用寿命影响非常大,市场上的铝方通厂家处理工艺有很大的区别,很多小厂基本上是采取作坊式、工艺寿命降低。建议进行铝方通选择时,一定要了解清楚这一块。
First, the material.
The aluminum materials on the market are mainly the following: According to the origin of aluminum materials, they are divided into ordinary aluminum, broad aluminum, and Southwest aluminum; According to the international label of aluminum, it is divided into 1100, 3003, 5005 and other label numbers; According to the strength of aluminum alloy divided into H24, H18 and so on; According to the toughness of aluminum, it is divided into ordinary aluminum, aluminum magnesium alloy and aluminum manganese alloy. Most of the ceiling materials sold on the market use ordinary aluminum materials, which are characterized by low strength, general flatness, strong toughness, and no deformation. Without a good substrate, it will greatly affect the service life of aluminum Fangtong.
Second, surface treatment.
The surface treatment of aluminum Fangtong mainly includes the following types: spraying, baking paint, rolling coating, coating. Among them, spraying and baking paint have a short service life, which is prone to color difference. The roll coating service life is centered, and the coating plate can be divided into ordinary membrane and imported membrane. The service life of imported membrane can basically reach 20 years without discoloration.
Third, the process.
The so-called process is the surface of the plate adhesion, which is a relatively neglected consumer. If the process is not good for the product's service life is very large, the processing process of aluminum Fangtong manufacturers on the market is very different. Many small factories basically adopt the workshop type and the process life is reduced. It is recommended that when selecting aluminum through the square, you must understand this piece clearly.